6/29/2021 0 Comments Basilisk Mac Emulator Hardfile
If you just bought the card, there have been issues with counterfeits that are labeled (and report to windows) with a size larger than they actually are.I have found some other emulators that also let you initialize and partition image files.
Basilisk Emulator Hardfile Mac Seems ToBUT SoftMac seems to be limited to supporting drive image files of 2857952 KB 2.7 GB or less.
Basilisk Emulator Hardfile Zip Version 8Download version 8.2 Unzip version 8.2 in to the installation folder you created (Figure 1). Basilisk Emulator Hardfile Archive And CanLuckily these ROM files are now available on the internet archive and can be used for personalresearch purposes. SoftMac will then prompt you asking if you want to use a ROM file or a ROM card (Figure 3), select OK SoftMac will prompt you to select the location of the ROM BIOS file(s) The ROM BIOS Setup window (Figure 4) will appear: Press the Scan button, the list of available ROM BIOS image files should appear in that list. Select Close The SoftMac profile selector (Figure 5) should now be displayed. Select the profile you want to edit or copy, Im going to select the Classic profile with a Macintosh Plus BIOS for this example. The Properties Window (Figure 6) lets you: Change the resolution: only 512342 is available in the classic profile (higher resolutions are available under the other 2 profiles) The amount of memory: select 4M (more memory is available under the other 2 profiles) The BIOS file: Ive selected the Macintosh Plus file v3 from the internet archive. Check the Windows file access check box Press Disk Properties The Disk Properties Window (Figure 7) lets you: Map the emulated MACs drive to a floppy drive or image file. I found SoftMac started significantly faster with floppy drive emulation disabled. Select Close On the Properties Window (Figure 6) select Save, and then Ok On the profile window (Figure 5) select the profile you just edited, and press the Restart button. If you followed my guide, and you should now see the Mac Desktop in SoftMac (Figure 8). Once the image has been Initialized, you can copy files from my image to your new image, e.g. OS folder etc. then write your image on to your SD card, or real drive. Because SoftMac can only initialize drive images that are 2857952 KB (2791 MB) or smaller, the 16 GB image file doesnt make any sense. If you are working with a SCSI2SD card I suggest you use one of my pre-created images as your drive 1 and then initialize your drive 2 as you want vs. Yes, I am working with SCSI2SD v6 and initially used your System 7.5.5. GB image and was able to boot fine on Device 1 (scsi id 0). Then I enabled Device 2 (scsi id 1) from the scsi2sd-util6 to be a second drive (also 2GB), but I am having a hard time partitioning the second device from System 7.5.5 HD using LIDO. Perhaps I am missing something but I followed your SCSI2SD guide and copied the System 7.5.5. GB image using dd onto my SD card and this gives me a bootable SCSI2SD. But once I am booted up on Device 1 and try to partition Device 2, LIDO or HD SC Setup keeps failing to partition it. The initialization of Device 2 works but not the partitioning. You dont actually need to dd the image a second time to the SD card for Device 2 do you Thanks Al. GB card actually only holds about 29.7GB, you need to make sure your device 2 isnt larger than the actual remaining capacity of your card. I realized this the first time I did my setup when I set device 1 as 2GB and device 2 as 30GB and ran in to problems. Second, if the first option doesnt work, your card may have issues. Id suggest doing a full format (not a quick format), and then checking the formatted size of the card.
0 Comments
Leave a Reply. |